231 - 240 of 1459
spdso14 digital output module
Selling leads
|
... to 0–20mA and 0–12.5 volts by adding jumper on the I/O Terminal Block. Default scaling is 0 to 20,000. Scaling can be changed in configuration to ...
2025-04-17 17:46:31
|
|
...two groups of 8 discrete inputs. The outputs are positive or sourcing type outputs. They switch the loads to the positive side of the DC supply and ...
2025-04-17 17:47:06
|
|
... group has a separate common associated with it (the two commons are not tied together inside the module). This allows each group to be used on ...
2025-04-17 17:46:33
|
|
... (10x rated current) The 5/48 Volt DC 0.5 Amp Negative Logic Output Module provides 32 output points in two isolated groups with 16 points in each ...
2025-04-17 17:46:36
|
|
... component of the Mark VI control system, designed to handle discrete output signals in industrial applications. This module serves as an interface ...
2025-04-17 17:49:30
|
|
... devices. A wide input voltage range and programmable thresholds allow the module to be used in current source and current sink configurations. ...
2025-04-17 17:45:47
|
|
... input to the module. A microprocessor on each channel scans each input point, compiles data, and transmits it to the Main Processors upon demand. ...
2025-04-17 17:50:57
|
|
... output points for this device are divided into two groups of eight, and each point is also isolated individually. Group to group and channel to ...
2025-04-17 17:46:42
|
|
... in GE Distributed Turbine Control Systems. This module typically includes analog input channels that can accept signals from sensors or devices in ...
2025-04-17 17:50:36
|
|
...-redundant modules supports all 16 channels for singleended configuration. All I/O field terminations of this IOTA is designed to accept up to 14 ...
2025-04-17 17:51:18
|