3-5 pieces/Min 30kw Hydraulic Briquette Machine for cold pressing
powdery
Introduction of hydraulic briquette machine
Hydraulic briquette machine (block press) is suitable for aluminum
alloy profile factory, steel casting factory, aluminum casting
factory and copper casting plant. The aluminum scrap, steel chip,
iron chip and copper chip pressing block are returned to the
furnace, which can replace scrap steel, pig iron, aluminum ingot
and scrap copper as raw materials, which can reduce burning loss.
The equipment can directly cold press the powder and granular cast
iron, steel, copper and aluminum chips into 3-6kg cylindrical cake
block, so as to facilitate transportation, furnace operation and
the whole process without heating, additives or other processes.
The density of cast iron chips can reach 5-6t/m3 after pressing.
The product can also be used in China or imported hydraulic and
electrical components according to the requirements of customers,
equipped with automatic feeding, weighing and other devices.
Technical data of briquette machine
No. | Type name | Model or Data |
Main cylinder | Acceleration cylinder | Push block cylinder | Feeding cylinder |
1 | Nominal pressure | 5306KN | 358KN | 500KN | 150KN |
2 | Inner diameter of cylinder | Φ520mm | φ135mm | Φ200mm | φ110mm |
3 | Piston diameter | Φ300mm | Φ70mm | Φ80mm | φ70mm |
4 | Stroke | 430mm | 440mm | 240mm | 390mm |
5 | System Max.pressure | 25Mpa | 25Mpa | 16Mpa | 16Mpa |
6 | Upper and lower beams | Integral steel casting |
7 | Main pressure cylinder | Integral steel casting |
8 | Motor | 2 sets | 45kw |
9 | Oil pump | 2 sets | 80MCY14-1B |
10 | Briquette density | 5.5-6T/m3 (Aluminum powder) |
11 | Briquette diameter | Φ200mm (Aluminum powder) |
12 | Work efficiency | 3-5 pieces / min |
12 | Capacity | 2-2.5 ton/H (Aluminum powder) |
13 | System control | PLC program control, with adjustable text display; cartridge valve
block |
14 | Cooling mode | 12m2 water cooler, automatic temperature control |
15 | Operation mode | Manual / Full automatic |
16 | Machine size | 2600*3200*4000mm |
17 | Machine weight | 15 Ton |
Application of hydraulic briquette machine
Briquette machine is mainly used for cold pressing powdery,
granular, small flake copper chips, iron chips, aluminum chips,
alloy powder, stainless steel chip, iron ore powder, magnesium
powder, copper powder and other metal chips Into a 3-5 kg
cylindrical cake. It can also be used for pressing non-metal
materials such as coke and slag powder.
Features of hydraulic briquette machine
1. This machine adopts hydraulic transmission, highly
integrated valve block, super large flow diameter, so that the
system has less pressure loss and good sealing performance.
2. The use of cartridge valve, electro-hydraulic proportional valve
and unique oil circuit design make the hydraulic system in good
condition. Even in the case of long-term heavy load, the system
will not be unable to work.
3. The pre unloading device is designed to eliminate the hydraulic
shock completely.
4. Advanced fast device to ensure your production.
5. The electrical part adopts imported PLC automatic control
system, which has strong anti-interference ability and low failure
rate.
Advantage of metal briquette
1. Logistics and warehousing
Briquettes can be stored and transported like solid waste. Because
of their high bulk density, they can be easily stored and
transported at low cost.
2. Waste of high quality materials
If the briquette processing site is directly pressed at the place
where the debris is generated, the corrosion can be effectively
prevented, and the exposed surface of the material can be greatly
reduced. This avoids the formation of oxides. In the process of
pressing block, the cooling lubricating oil can be extracted and
reused at the same time, which saves the cost.
3. Smelting related advantages
In foundry, briquettes are valuable resources. Briquettes are easy
to manage and add, which can reduce melting time and save energy
cost.
4. Economic advantages of briquetting
The above factors make the pressed scrap metal more valuable than
the original one. The source of metal chip briquette may be
processing company without foundry, or casting machinery parts
company. Chip processing companies can also sell the chips at a
better price.