61 - 70 of 115
cvd surface coating trimming die
Selling leads
|
... surfaces when it is geometrically possible. Large number of shapes with very high geometric complexity. Coating, the most suitable for the ...
2024-12-09 12:33:41
|
|
...Trimming Cutting Die With Various Size Products Description Advice on carbide and steel grades for different applications. Perfect tangent radius. ...
2025-08-04 00:07:59
|
|
...Dies Set With Machined Or Blank Surface Product Description: Minimum and maximum dimensions: Holes from 1,0 up to 40 mm, outer dimensions from 10 ...
2024-12-09 12:33:41
|
|
...Dies With TiN Coating Material: Carbide＞M42(H59)＞M35(H55)＞M2(H9) H9(M2) Chemical Composition C Si Mn P S Cr Mo V W Content (%) 0.85 0.33 0.34 0.027 ...
2024-12-09 22:42:45
|
|
...length from 1,0 up to 300 mm. Mirror polish before and after coating. Different technologies. ± 0.005 mm tolerances. Possibility of tooling design. ...
2025-08-04 00:07:59
|
|
...Die with Various Material VA80 ST7 KG5 KG6 for Different Size Product Description Minimum and maximum dimensions: Holes from 1,0 up to 40 mm, outer ...
2025-04-04 06:36:40
|
|
...Die OEM ODM For Screw Cold Heading Die Minimum and maximum dimensions: Holes from 1,0 up to 40 mm, outer dimensions from 10 up to 200 mm, length ...
2024-12-09 12:33:41
|
|
...Dies Inch Screw Die 0.01mm Tolerance Product Description: Minimum and maximum dimensions: Holes from 1,0 up to 40 mm, outer dimensions from 10 up ...
2024-12-09 12:33:41
|
|
...10 up to 200 mm, length from 1,0 up to 300 mm. Mirror polish before and after coating. Different technologies. ± 0.005 mm tolerances. Possibility ...
2024-12-09 12:33:41
|
|
...Dies , Segmented Hex Carbide Die Product Description Minimum and maximum dimensions: Holes from 1,0 up to 40 mm, outer dimensions from 10 up to 200 ...
2024-12-09 12:33:41
|