Aluminum Tube Straightening and Cutting Machine, Tube Straightener Machine

 Aluminum Tube Straightening and Cutting Machine, Tube Straightener Machine

1. Main Application
The aluminum tube straightening and cutting machine is used for straightening and cutting aluminum harmonica tubes of parallel flow condensers. The aluminum tube straightening and cutting machine is driven by a servo motor. The raw material is conveyed by a precision linear guidance rail. Cutting of the pipes is conducted through a revolving knife or a linear knife.

The aluminum tube straightening and cutting machine is also equipped with a fully-automatic decoiler.
Coil inner diameter: 450-500mm; width: 300-330mm; decoiler bearing weight: 300kg;
Coil feeding method: manually place the coil on the decoiler, and screw up the coil expansion core;
Decoiler motor power: 0.75kw
The decoiling method is stable and reliable. The equipment has a high cutting accuracy and a fast working speed.

The aluminum tube straightener is able to cut different pipes by adjusting the distance of the straightening rolling wheels. It takes twice or multiple charges to cut the aluminum tube when the cut-to-length is very large.

2. Main technical parameters

3. Structural Introduction

3.1 decoiler

Size: Φ1800*1700 (H)mm

Coil inner dia: 450 mm -500 mm；

Width:300-330 mm;

Loading capacity:300kg

3.2 Straightening device

Structure: roller leveling alignment in width and length direction

Adjustment method: by adjusting the straightening wheels

3.3 Pneumatic necking device

It uses air cylinder twitch type, combining tooling to reduce the end of the flat tube.

3.4 Feeding device;

Feeding device: servo motor driven ball screw; feed speed is high, and with high feed precision.

Feed speed: 600 mm/s.

Feed precision: servo control 0.1 mm.

Component configuration: Delta servo motor and servo system

3.5 Clamping device

Structure: adopting the cylinder push plate to realize clamping, each flat tube is clamped by different cylinder.

Component: Cylinder

3.6 Cutting device

Structure: cylinder clamping flat tube, the pneumatic hob,

Component: Taiwan TBI company linear guide device.

3.7 Machine main body

Including: Delta touch screen

4. Main Parts of Machine

5.Configuration List

6. Accessories with Machine