80mesh Super Speed PC 45kw Grinding Milling Machine
|
Detailed Product Description
|
Application of high speed mill: The high-speed and high-efficiency
pulverizer manufactured by Beisu Machinery is especially suitable
for TPU, LLDPE, PVC, PE, PET, EVA, PP, PA, rubber, and various
rigid, soft, elastomer, low-temperature materials, and film
materials. , Sheet thermoplastic materials. According to the
classification of the grinding materials, the mills are mainly
divided into two categories: rotor (turbine) mills and disc mills. The working principle of the high-speed mill: The high-speed
rotation of the grinding disc driven by the main shaft of the
plastic pulverizer collides with the fixed cutter disc, cutting the
material into powder (without sieve). The ground fine powder is
brought into the vibrating screen along with the circulating air of
the blower for sorting. The coarse material falls back to regrind,
and the qualified fine powder enters the finished product storage
with the cyclone and is discharged through the powder outlet pipe.
That is the finished product. The air is discharged from the dust
collector. PVC Pipe /Ceiling/ Board/ Films/ Sheets Pulverizer milling: PE/PET/ABS/PA/TPE/LLDPE/EVA Puverizer:
The core patents of the high-speed pulverizer milling machine: A1: Grinding chamber; Cutter head and grinding disc are air-cooled
and water-cooled, especially suitable for processing thermoplastic
materials; A2: Transmission device of the pulverizer; Adopts European-style
belt wheel, high-speed operation is not loose, and it is more
convenient for daily maintenance; A3: Pulverizer blade; PVC cutter head is made of wear-resistant
steel material, special tooth shape design, double the service
life; the frequency of use of the cutter head is determined
according to the material, usually grinding to 400 tons needs to be
replaced. (Depending on the blade wear condition);
PE/PET/LDPE/ABS/EVA/PC/FIBER grinding disc adopts SKD-11; tungsten
steel;stainless steel whole plate material, special tooth shape
design, double service life; cutter head The frequency of use is
determined according to the material, and usually the grinding
powder to 400 tons needs to be replaced. (It depends on the wear of
the blade); A4: Mill knife adjustment system; Combined with German technology,
taking into account the convenience of customers, the knife
adjustment of the cutter needs to remove the movable cutter disc,
add or subtract washers, and adjust the disc clearance to ensure
that there is no abnormal noise; The adjustment knife is
distributed outside the grinding disc. According to the thickness
of different materials, the bolts outside the grinding disc are
adjusted at the same time. After the nuts are locked, the gap
between the four bolts can be ensured. A5: Refueling device for the mill; especially an oil pump refueling
device is added, which is convenient for users to refuel daily work
without stopping the machine; A6: The mill is externally exhausted; The air volume reaches 1704
m3/h, and most of the heat is taken away by the temperature
difference between the inlet and outlet air. A small part of the
heat is solved by water cooling.The inlet temperature of cold water
is required to be no more than 25°C, and the outlet water
temperature is no more than 45°C. In summer, the cooling tower can
be used to circulate water to lower the temperature. A7: Fully automatic, automatic feeding, discharging and sorting; |
|||||||||||||||||||||||||||||||||||
| Product Tags: PC Grinding Milling Machine 80mesh Grinding Milling Machine 45kw Grinding Milling Machine |
Related Products
|
MF-400/500/600/800 SKD-11 Plastic Puverizing Disc Blade For PE/PET/LDPE/HDPE/PET Grinding Milling |
|
80mesh Super Speed PC 45kw Grinding Milling Machine |
|
PET Disc Blade 100kg/H 3700rpm Plastic Pulverizer Machine |
|
8.0mm 2900rpm Ss Disc Blade Pe Pulverizer Machine |
|
20mesh Siemens PE Pulverizer Machine With Water Chiller Cooling System |
|
440V 500kg Per Hour PE Pulverizer Machine With ABB Inverter Control |
Email to this supplier