LCD Display 0.01mm RS232 Ultrasonic Thickness Gauge

TG-MT200 Ultrasonic Thickness Gauge is a digital ultrasonic thickness gauge. Based on the same operating principles as SONAR, the MT200 is capable of measuring the thickness of various materials with accuracy as high as 0.01 millimeters, or 0.001inches. It is suitable for a variety of metallic and non-metallic materials

TG-MT200 Ultrasonic Thickness Gauge Digital Ultrasonic Thickness Gauge

1. Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials.

2. Four transducer models are available for special application, including for coarse grain material and high temperature applications.

3. Probe-Zero function, Sound-Velocity-Calibration function

4. Two-Point Calibration function.

5. Two work modes: Single point mode and Scan mode.

6. Coupling status indicator showing the coupling status.

7. Battery information indicates the rest capacity of the battery.

8. Auto sleep and auto power off function to conserve battery life.

9. Optional software to process the memory data on the PC.

10. Optional thermal mini-printer to print the measured data via RS232 port.

Galvanaized Coating Thickness Gauge Meter

1. Applicable to measure the thickness of any hard materials, e.g. steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene PVC, gray cast iron, nodular cast iron
2. Automatic Zero Adjustment
3. Data Store Function for up to 20 t files (up to 99 values for each file) of stored value
4. Auto Power Shut Off
5. Linear compensation circuit for high accuracy (1%H+0.1)
6. Speed of sound testing (m/s) with 12 storage memory.
7. 2.5 MHz for rough surface measurement

TG-MT200 Ultrasonic Thickness Gauge Digital Ultrasonic Thickness Gauge

1) Display:128×64 dot matrix LCD with EL backlight.

2) Measuring Range:0.75~300mm (in Steel).

3) Sound Velocity Range: 1000~9999 m/s.

4) Resolution:0.1/0.01mm(selectable).

5) Accuracy: ±(0.5%Thickness+0.04)mm

6) Units: Metric/English unit selectable.

7) Four measurements readings per second for single point measurement, and ten per second for Scan Mode.

8) Memory for 20 files (up to 99 values for each file) of stored values.

9) Upper and lower limit can be pre-set. It will alarm automatically when the result value exceeding the limit.

10) Power Supply:Two "AA" size, 1.5 volt alkaline batteries. 100 hours typical operating time(EL backlight off).

11) Communication:RS232 serial port.

12) Case:Extruded aluminum body suitable for use under poor working conditions.

13) Outline dimensions:132H X 76.2W mm.

14) Weight:345g

Configuration

Appendix A: Transducer Selection

Appendix B: Sound Velocities