Zr702 Zr704 Zirconium Niobium Sputtering Targets Annealed State

Good Price Zirconium Niobium Sputtering Target

Zirconium Niobium Sputtering Target 10 (niobium-zirconium, Nb-Zr 90/10 wt%). We professional manufacturing Nb-10Zr alloy target, Make the hydrogenation dehydrogenization niobium powder into electrode and purify it, then form niobium ingot in vacuum arc furnace. Remove the impurities and vaccum dry it and forged it to zirconium sheet. Stick zirconium sheet to niobium sheet and put them into vaccum chamber. get niobium zirconium compound ingot niobium-zirconium Nb-Zr 90/10 wt%. Melt the niobium zirconium compound ingot niobium-zirconium, Finally get niobium-zirconium, Nb-Zr 90/10 wt%.

Niobium Zirconium Alloys Targets introduce:

The binary alloy with zirconium as the base and the element niobium is added, and the basic composition is Zr-1%Nb and Zr-2.5Nb%. It has good corrosion resistance to acid, alkali, and salt. It has good corrosion resistance and mechanical properties to high temperature and high-pressure water and steam at 300~400℃.

The most prominent is that a new oxide film with protective ability can grow again at the place where the oxide film is peeled off, and there is no obvious corrosion turning point. The tensile strength is 84MPa, the yield strength is 78MPa, and the elongation is 15%. It is prepared by the consumable electrode smelting process. Cladding materials for heavy water reactors, nuclear power plants, and submarine reactors.

Physical Property of Niobium Zirconium Alloys Targets

• Compound Formula: NbZr

• Appearance: Metallic solid in various forms tube, sheet/plate, bar, foil, wire, rod, sputtering target.

• Melting Point: 2399°C

• Density: 8.59 g/cm3

• Tensile Strength: 330-620 Mpa

• Vickers Hardness: 65-140

• Monoisotopic Mass: 182.811g/mol

Niobium Zirconium Alloys Targets Picture:

Titanium Tantalum Alloys advantage:

• High-temperature alloy

• Low Thermal Neutron Absorption Cross Section,

• Good Corrosion Resistance

• Good Resistance to Radiation Damage.

Ti-Ta Alloy Targets Application:

• Sodium and Magnesium vapor lamp electrodes

• Coating the inside of SS 316 tubes to improve corrosion resistance.

• Nuclear Applications

• Glass Coating

Titanium Tantalum Alloy Target Dimensions and Shapes

Now our main Niobium Zirconium Alloys is Nb-10Zr Plate Targets.

Dimension: 18T x 244x3710mm / 20Tx244x3710mm

18Tx280x3050mm / 18Tx280x3050mm

This specification Niobium 10%Zirconium Plate Targets widely used for Glass Coating Industrial.

ISO 9001 Certificates:

Quality control is an important part of quality management and a key factor in testing the actual effects of quality certification.has passed the international ISO9001 Quality Certification System and has access to the ISO9001:2000 international quality certification certificates.