1mm with High Purity Zirconium Welding Wire Hot Sale At
Low Prices
Zirconium Welding Wire is an active metal. It will form oxide film
at room temperature, which makes zirconium and its alloys have
excellent corrosion resistance. At the same time, zirconium has
good mechanical and heat transfer properties, coupled with
significant cost advantages, making it an excellent
corrosion-resistant structural material in the field of
petrochemical industry.
Product Specification Sheet of Zirconium Welding Wire
| Product Name | Size(mm) | Condition | Grade | Standard |
| Zirconium bar/rod/wire | Diameter (30~200) x Length 3000 | Forging | Zr702, Zr705, Zircaloy | ASTM B550
ASTM B550M
GB/T21183-2007 |
| Diameter (5~60) x Length 3000 | Rolling |
| Diameter (0.1~3.0) | Drawing |
Physical & Mechanical Properties of Zirconium Welding
Wire
- Grade: R60702, R60704, R60705, ZR1
- Standard: ASTM b550/550M, GB / t21183-2007
- Density: 6.51g/cm3
- Melting point: ≥ 1800 ℃
- Purity: ≥ 99.6%
- Thermal conductivity: 22 W/(m °C)
- Elastic bending modulus: 99.3 GPa
- Thermal expansion: 5.4x10 /°C
- Surface: bright, no crack, no peeling, no obvious oxidation
- Surface flatness: ≤3%
Processing technology of Zirconium Welding Wire
- Forging
- Rolling
- Drawing
- Lathing
- polishing
Product characteristics of Zirconium Welding Wire
Zirconium welding wire has excellent corrosion resistance. It has
good corrosion resistance to most organic acids, inorganic acids,
strong bases and some molten salts. Hydrochloric acid, nitric acid
and organic acid near 100 ℃ had no effect on zirconium. The
corrosion resistance of zirconium in alkali is better than that of
titanium, tantalum, niobium and stainless steel. Therefore,
zirconium has been widely used in industry and chemical industry.
Product uses of Zirconium Welding Wire
It is mainly used in pressure vessel, petrochemical industry,
aerospace, marine engineering, hydrogenation reactor and other
fields.
