High Strength Two Parts Silicone Glazing Sealant Good Adhesion UV Resistance

PU Sealant for Glazing with high strength Two Parts Silicone Structural Glazing Sealant Hot on Sale

Description

SV – 8000 two-component polyurethane insulating glass sealant is a neutral cure, mainly used for the insulating glass of the second seal. Product formulation to use its performance with high modulus, high strength, to meet the requirements of insulating glass assembly.

Where to use

It is a two-component PU sealant that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.

Key Features

1. High Modulus

2. UV resistance

3. Low vapor and gas transmission

4. Primerless adhesion to coated glass

Technical data sheet

Certification

GB-24266-2009;

Color

Component A(Base) – White, Component B(Catalyst)- Black

Package

1. Component A(Base): (190L), Component B(Catalyst) (18.5L)

2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)

Application

Attentions

Use restrictions

SV-8000 products will be used in structural wall assembly.

All materials used in engineering are successful by sticky relay and compatibility test

SV-8000 do not contact with any acidic sealant

This product is not tested does not apply to medical USES.

The construction application

In order to achieve the best physical properties SV-8000 should be the main agent and curing agent with airtight hybrid system. SV-8000 applies to general a two-component silicone rubber mixing machine on the market. Whatever mixing by hand or with a hand mixer will not bring a satisfactory effect, that is because mixture once joined the air would make its original nature changed.

PU SV-8000 insulating glass sealant without lot number.

SV-8000 PU insulating glass sealant curing agent before use must first stir in order to avoid in the process of transportation may produce precipitation phenomenon.

Due to the curing agent could react with moisture from the atmosphere, not exposed to the air for a long time. SV-8000 product main agent and curing agent ratio of the weight of the now. The user can change the mix ratio weight ratio of 10:1 to 14:1 (volume ratio by 7.5 ~ 10.5:1), regulate the coagulation time. Within the scope of the mixture of sealant, its original characteristics there will be no significant change. But if the humidity of the air or omit, will influence the period of testing time and the time required to form a bond.

To get the right mix ratio, please contact Siway or mixing machine manufacturer.

Must be used immediately after turning sealant tool to press it gently into the interface and finishing, to ensure that it can completely within the bonding at the interface on the surface, resulting in better effect. Before shutdown, please only use the main agent into the mixer and the conveying pipe, and using the main agent to wash it. This will prevent sealant cause blockage in the internal curing.

To learn more about SV-8000 products of detailed information, please contact the local representative or designated agents. Our lab and technical staff ready to provide assistance.

Surface cleaning

All retained in the bonding surface residual moisture, dust, oil, paint, travel-weary sealant, fittings and protective coating completely clear.

primer

Using PU SV-8000 insulating glass sealant typically don't need a primer, but if the test report need to use primer bonding, with clean before get sealant in an excuse not to take off the velvet cloth will primer apply a thin layer on the surface and stay dry dry solid. Before it becomes sealant required test to determine whether need primer.

Glue machine clean

When it is completed should be cleaned immediately to the main agent or in an appropriate solvent cleaning glue gun. Such as glue gun head in case of curing structural adhesive, is in the right time in solvent in addition to clear it.

Note

If you want the TDS or MSDS or other details, please contact with our sales person.