41 - 50 of 82
wire test kit
Selling leads
|
...Wire and cable bending and torsion tester is according to pre-set test conditions (bending angle, bending rate, number of trials), with a ...
2024-12-09 21:54:49
|
|
...thermal bonding and solvent bonding performance of enameled round wires with a nominal diameter of 0.050mm and 2.000mm and below 4. The heat ...
2024-12-09 23:10:43
|
|
...Test Set I. Introduction: BDV-II Transformer Oil Test Set is designed according to the national standard IEC156 Insulation Oil Dielectric Strength ...
2024-12-09 19:27:52
|
|
... refers to IEC60332-3 test.This wire and cable fire-resistant impact test equipment is designed according to IEC 60331-12 and BS6387 -2013 standard...
2024-12-09 19:27:37
|
|
Wire and Cable Fire Resistance Characteristics Test Equipment Introduction: Fire-resistant cable refers to the cable that can keep a safe running time ...
2025-07-24 00:16:00
|
|
...1997 Sect 8.1~8.3 ● IEC 60811-508 gives the procedure for a pressure test at high temperature, which typically applies to thermoplastic compounds ...
2025-07-24 00:16:00
|
|
Wire and Cable Halogen, PH & Conductivity Testing Equipment Introduction The International Electrotechnical Commission IEC 60754 Part 1 and Part 2 ...
2025-07-24 00:16:00
|
|
... resistance of enameled round wires with nominal conductor diameter above 0.250mm; 3.Application of SCM control allows for fast operation and ...
2024-12-09 21:17:30
|
|
... of enameled round wires with nominal conductor diameter of between 0.080mm and 1.600mm; 3.This Springiness Test Instrument adopts SCM control for ...
2024-12-09 21:19:05
|
|
Constant Temperature Test Chamber 150L Reference standards: ● GB 2423.1-89 (IEC68-2-1)Basic environmental test procedures for electrical and ...
2025-07-24 00:16:00
|