31 - 40 of 91
thermal protective performance tester
Selling leads
|
...Tester has standard 6 phase voltage and 6 phase current output, voltage 125V/phase, current 30A/phase, 6 phases in parallel can up to 180A. The ...
2024-12-09 19:42:18
|
|
...Tester is suitable for the measurement of limited flame spread properties of protective clothing. The flame from the burner is applied for 10 s to ...
2025-07-24 00:16:00
|
|
... surface or the bottom of textile specimens which are vertically oriented. Features: Vertical Flame Spread Properties Tester s designed and ...
2025-07-24 00:16:00
|
|
...Films Flame Propagation Tester NFPA 701-2 Flammability Tester.pdf Introduction: NFPA 701: 2004 & 2009 are standards for fire-retardant fabric and ...
2025-07-24 00:16:00
|
|
...Tester This pour point apparatus is refrigerated by imported compressor made by Danfoss Denmark.Adopting most advanced refrigeration technology...
2025-07-24 00:16:01
|
|
... to simulate the textiles and films under risk of ignition to assume the flame spread performance . It is also suitable for the fabric material or ...
2025-07-24 00:16:00
|
|
..., electrical plants , scientific research, laboratories and other units. Primary Current Injection Tester is a short-term or intermittent work ...
2024-12-09 19:44:10
|
|
...Tester is specified apparatus for flammability of vinyl plastic film according to 16 CFR1611. The SPI 45 degree flame tester is manufactured in ...
2025-07-24 00:16:00
|
|
Low Temperature Torque Tester for Grease-Lubricated Wheel Bearings Introduction This Low Temperature Torque Tester is suitable for measuring the ...
2025-07-24 00:16:01
|
|
...radiated by heat, and the flame impact is applied at the same time. Then the combustion performance of the samples, such as the continuation of ...
2025-07-24 00:16:00
|