21 - 30 of 195
single flame flammability test equipment
Selling leads
|
... to ignition by a small flame, with surface ignition and edge ignition. Feature The combustion chamber is made from corrosion resistant stainless ...
2026-06-21 00:05:43
|
|
ASTM D1929 Ignition Temperature Tester Introduction: The ignition temperature tester is designed and manufactured in accordance with the technical ...
2026-06-21 00:05:42
|
|
... requirements relating to all toys and specific requirements and methods of test relating to the following toys, which are considered as being ...
2026-06-21 00:05:42
|
|
Sleeping Bags Flammability Testing Equipment Main Features: 1, Stainless steel test cabinet with glass observation window; 2, Sleeping Bags Flammabili...
2026-06-21 00:05:42
|
|
...853 and CCAR-25 Appendix F of the first part b (4), b (6), b (7) .Equipment integrated appendix F the first part b4 vertical combustion and b 6 45 ...
2026-06-21 00:05:42
|
|
... spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is ...
2026-06-21 00:05:42
|
|
EN50339 Bunched Cable Vertical Flame Spread Tester BVC bunched cable vertical flame tester Introduction EN 50399 specifies the tester and methods of ...
2026-06-21 00:05:42
|
|
... flame from a specified burner is applied for 10 s to the surface or the bottom edge of textile specimens which are vertically oriented. Feature ...
2026-06-21 00:05:42
|
|
... that controls the heat flux, flame distribution and duration of the flame test manikin. The Instrumented Manikin Flame Engulfment Test Equipment ...
2026-06-21 00:05:42
|
|
... used in upholstered furniture. Meet CFR 1615/1616, ASTM D6413 and CALIF TB117. Features: ASTM D6413 Vertical Flame Spread Test Equipment uses ...
2026-06-21 00:05:42
|