11 - 20 of 41
simulated service corrosion tester
Selling leads
|
TEOST MHT Thermo-oxidation Engine Oil Simulation Tester Introduction: MHT TEOST is used for the engine oil thermal oxidation simulation test. The ...
2024-12-09 19:51:33
|
|
... into a test piece bundle, and then completely immersed in the specified test piece. At the end of the test, the test piece was taken out, cleaned ...
2026-09-16 00:46:16
|
|
... liner, corrosion-resistant and easy to clean; 3. The Corrosive Sulfur Tester is equipped with fan circulation and lighting device in the box; 4. ...
2024-12-09 20:31:24
|
|
... the cold-cranking simulator (CCS method) and American ASTM D5293.At the temperature range: -35℃∼-5℃,the interval 5℃ temperature condition , and ...
2025-12-30 00:26:30
|
|
... for the determination of engine oils with a test temperature range of -10 ℃~-35 ℃ and an apparent viscosity range of 900mPa·s~25,000 mPa·s. The ...
2026-03-15 00:28:15
|
|
I. Coking Tendency Tester (also called Panel Coking Tester) Used to evaluate the deposit-forming tendency of lubricating oils under high-temperature ...
2026-08-22 00:46:22
|
|
... to simulate the textiles and films under risk of ignition to assume the flame spread performance . It is also suitable for the fabric material or ...
2026-10-23 00:06:26
|
|
Thermal Oxidation Deposits Tester I. Introduction: High-Temperature Oxidation Deposits Tester is used for thermo-oxidation engine oil simulation test...
2026-06-02 07:30:47
|
|
...Corrosion Tester This test method covers a laboratory screening procedure for evaluating the effectiveness of engine coolants in combating ...
2026-09-15 07:30:35
|
|
... wet conditions Features: 1. This Corrosion-Preventive Properties Tester is supplied with standard test bearing,30*72*19mm3; 2. Inspect bearing ...
2026-10-23 00:06:26
|