581 - 590 of 672
secondary injection test equipment
Selling leads
|
Introduction The Drop Melting Point Apparatus is suitable for detecting the drop melting point of petroleum wax and grease. Characteristic 1. Water ...
2025-08-02 00:10:29
|
|
Introduction Coat the sample on a new bearing and run it for 60 seconds under a light thrust load to distribute the grease as it is used. The bearing ...
2025-08-02 00:10:29
|
|
Introduction: It is an important equipment for DC voltage withstand test and leakage current test of HV electrical equipment, cables, surge arresters ...
2024-12-09 19:44:10
|
|
... power equipment. The water content value of SF6 gas should be measured in route test. SF6 Dew Point and Micro water content Test set is applied to ...
2024-12-09 19:27:52
|
|
...Tester is designed and manufactured for electrical equipment very low frequency withstand voltage test. Very low frequency withstand voltage test ...
2025-08-02 00:10:29
|
|
VTD Double Stage High Vacuum Oil Filtration Plant I.Application: This transformer oil filtration plant is mainly used to remove gas,water and ...
2024-12-09 19:27:52
|
|
VTD-4 Double Stage High Vacuum Oil Purifier for Transformer Oil I.Application: This transformer oil purifier is mainly used to remove gas,water and ...
2024-12-09 19:27:52
|
|
Introduction: AC DC Hipot is applied to test the insulation ability of electric power equipment and insulation materials at power frequency high ...
2024-12-09 19:44:10
|
|
... used with the sample cutter that equipped with dumbbell die. Standard: • GB/T 2951-2008 Technical parameters: • Max cutting width: 50mm • Cutting ...
2025-08-02 00:10:29
|
|
... and Volume Resistivity of insulating oil etc. This dielectric loss tangent meter is integrated with oil cup for dielectric loss, temperature...
2024-12-09 19:27:52
|