651 - 660 of 755
oxidation stability testing equipment
Selling leads
|
Introduction The Drop Melting Point Apparatus is suitable for detecting the drop melting point of petroleum wax and grease. Characteristic 1. Water ...
2026-04-29 00:14:54
|
|
Introduction Coat the sample on a new bearing and run it for 60 seconds under a light thrust load to distribute the grease as it is used. The bearing ...
2026-04-29 00:14:54
|
ASTM D5481 Multicell Capillary Viscometer for 150℃ HTHS Apparent Viscosity with Computer Controlling
|
General Introduction This HTHS Dynamic Viscosity Tester determines the high-temperature high-shear (HTHS) apparent viscosity of engine oils using a ...
2026-03-15 00:28:15
|
|
General Introduction This Lubricating Oil HTHS Dynamic Viscosity Tester This instrument employs a multi-capillary viscometer equipped with pressure...
2026-03-15 00:28:15
|
|
Product Description The Fully Automatic Open Cup Flash Point Tester (GB/T 3536) is used to determine the open cup flash point and fire point of ...
2026-03-27 07:30:19
|
|
... power equipment. The water content value of SF6 gas should be measured in route test. SF6 Dew Point and Micro water content Test set is applied to ...
2024-12-09 19:27:52
|
|
...Tester is designed and manufactured for electrical equipment very low frequency withstand voltage test. Very low frequency withstand voltage test ...
2026-04-29 00:14:54
|
|
...digital Signal Processor Microcomputer, so it can not only test the traditional relays and protectors, but also can test the modern micro computer ...
2024-12-09 19:42:18
|
|
Introduction: AC DC Hipot is applied to test the insulation ability of electric power equipment and insulation materials at power frequency high ...
2025-12-02 14:14:26
|
|
... used with the sample cutter that equipped with dumbbell die. Standard: • GB/T 2951-2008 Technical parameters: • Max cutting width: 50mm • Cutting ...
2026-04-29 00:14:54
|