41 - 50 of 77
optical cable impact tester
Selling leads
|
...radiated by heat, and the flame impact is applied at the same time. Then the combustion performance of the samples, such as the continuation of ...
2026-10-23 00:06:26
|
|
...Tester is suitable for testing the combustion resistance of self-contained open-circuit compressed air respirator (air respirator) in EN136 ...
2026-10-23 00:06:26
|
|
Product description: Wire swing tester is used for non-rewirable plug wires, household appliances wires and similar electrical appliances wires ...
2024-12-09 21:42:52
|
|
Product description: Automatic durability of indelible ink printing tester can be used to test the abrasion resistant performance of printing on the ...
2024-12-09 21:50:32
|
|
General Introduction 1.1 Product Description Horizontal and veruical burnlng tester is malnly used for plastic or fim under the speciied fre source ...
2026-02-13 00:28:13
|
|
50KV Very Low Frequency (VLF) Withstand Test Set I. Introduction: The VLF withstand test set is suitable for testing cables, transformers, switchgear, ...
2026-10-23 00:06:26
|
|
... etc from a wire (cable) by radiant heat in the Tube Furnace (IEC 60754-1: 800℃, IEC 60754-2: 950℃). Standards: IEC 60754-1~2-1994 Technical ......
2026-02-12 19:38:12
|
|
... fame test standard, is used for test of W.1 and FT.2. it's economic and applicable, which is widely used inwire and cable industry. The test is ...
2026-02-12 19:38:10
|
|
...Tester is used to test the contact resistance of circuit breaker or high current cable contacts. It is designed according to IEC62271. The main ...
2026-08-31 15:48:39
|
|
...Tester is used to test the contact resistance of circuit breaker or high current cable contacts. It is designed according to IEC62271. The main ...
2026-08-31 15:48:40
|