101 - 110 of 128
lubricating oils tester
Selling leads
|
... are thrust-loaded to approximately 111N,the hub is rotated at 1000 rpm and the spindle temperature maintained at 160ºC for 20h.Leakage of grease ...
2024-12-09 21:21:35
|
|
SCT-III Sulfur in Oil Test Equipment SCT-III sulfur content tester.pdf Summary The sulfur in oil test equipment is specially designed to determine ...
2024-12-09 19:27:52
|
|
ASTM D95 Petroleum Oil Water Content Testing Equipment by Distillation Method WCT-R1 water content tester.pdf Summary This water content analyzer is ...
2025-07-30 00:10:05
|
|
ASTM D381 Fuel Oil Existent Gum Testing Equipment by Jet Evaporation Method Summary This existent gum tester is designed and made as per standards GB...
2024-12-09 19:27:52
|
|
Product Description Introduction: This Thermal Stability Test Instrument is suitable for testing the stability of Unused mineral oil and synthetic ...
2024-12-09 22:04:44
|
|
Introduction Load the sample into the modified front wheel hub and shaft assembly, and let the hub and shaft run for a total of 360±5 min under the ...
2025-07-30 00:10:05
|
|
Introduction Coat the sample on a new bearing and run it for 60 seconds under a light thrust load to distribute the grease as it is used. The bearing ...
2025-07-30 00:10:05
|
|
Introduction The sample circulates for 1064h at 88 ºC and a certain flow rate in a closed system composed of a reservoir, a water pump, a radiator and ...
2025-07-30 00:10:05
|
|
Fully Automatic Cleveland Open Cup Flash Point Analyzer ASTM D92 Automatic Open Cup Flash Point Test Instrument According to test method of GB/T3536...
2025-07-30 00:10:05
|
|
Product Description ASTM D7279 Automatic Houillon Viscometer This Automated Houillon Viscometer is manufactured according to Nb/SH/T 0956-2017 folding ...
2025-07-30 00:10:05
|