31 - 40 of 286
lubricating grease testing machine
Selling leads
|
...test machine uses four Ф12.7mm standard steel balls evaluate the load-bearing capacity and anti-wear performanceof lubricants (including oil film ...
2026-06-27 00:05:44
|
|
... the oil sample to temperature 25,50 or 75℃,blow compressed air through the test oil,make make it stirred strongly.Air becomes small bubbles in the ...
2026-06-27 00:05:44
|
|
...grease or oil, and observe the condition of the bearing surface at the end of the sample. This Leakage Tendencies Test Instrument is suitable for ...
2026-06-27 00:05:44
|
|
...relative humidity, and then clean and inspect for signs of corrosion on the outer ring raceway of the bearing. Main feature ◆ The Corrosion ...
2026-06-27 00:05:44
|
|
...lubricant anti-wear tester is specially customized for lubricants and additives companies. It’s made according to the test principle of the US ring ...
2026-06-27 00:05:44
|
|
...test machine is a multi-purpose testing machine. Can be used for the assessment of the carrying capacity of the lubricant, Also can special made by ...
2025-11-18 00:31:18
|
|
Saponified Matter Content Tester I. Introduction: This Saponified Matter Content Tester is designed and manufactured according to GB/T 8021 ...
2026-06-19 07:30:21
|
|
...Petroleum and Liquid Petroleum Products. It is a newly developed density testing instrument for liquid petroleum products, suitable for testing the ...
2026-04-29 07:30:17
|
|
General Introduction This Cone Penetration Tester is designed and made as per T0604Penetration Test for Bituminous Materials in JTG E20 Specification ...
2026-01-14 00:29:14
|
|
Introduction Coat the sample on a new bearing and run it for 60 seconds under a light thrust load to distribute the grease as it is used. The bearing ...
2026-06-27 00:05:44
|