21 - 30 of 77
horizontal flame tester
Selling leads
|
...Flame Source Tester is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. It uses the German Kleinbrenner principle to ...
2025-07-22 00:17:10
|
|
... to simulate the textiles and films under risk of ignition to assume the flame spread performance . It is also suitable for the fabric material or ...
2025-07-22 00:17:10
|
|
..., flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is originated from ISO 5658-2 ...
2025-07-22 00:17:10
|
|
...Horizontal and Vertical Flame Test Chamber Introduction: This Horizontal and Vertical Flame Test Chamber is widely applied throughout industry, ...
2025-07-22 00:17:10
|
|
Bunched Cable Vertical Flame Spread Tester Introduction EN 50399 specifies the tester and methods of test for the assessment of vertical flame spread, ...
2025-07-22 00:17:10
|
|
... and quality supervision, inspection and other industries or establishments with different requirements for protective clothing for thermal ...
2025-07-22 00:17:10
|
|
..., pillow, duvet, and similar products that used to cover on the bed of the flame retardant performance. This test method is use the standardize ...
2025-07-22 00:17:10
|
|
... panel heating and a gas burner ignited. This method is widely used in flame propagation properties of the test material for rail train material to ...
2025-07-22 00:17:10
|
|
... to ignition by a small flame, with surface ignition and edge ignition. Feature The combustion chamber is made from corrosion resistant stainless ...
2025-07-22 00:17:10
|
|
Needle Flame Test Apparatus by IEC60695-11-5 Introduction Needle Flame Tester is designed according to international standards IEC60695-2-2 and ...
2025-07-22 00:17:10
|