31 - 40 of 151
heat release test system
Selling leads
|
... spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is ...
2025-07-21 00:15:48
|
|
...Testing Equipment For Surface Products ISO 9705 ASTM E603 Introduction According to ISO9705 of building materials fire prevention performance ...
2025-07-21 00:15:48
|
|
...Testing Equipment for Laminated Foil BS476-6 FPT.pdf Introduction: BS 476-6 is a test method of measuring the flame propagation properties of ...
2025-07-21 00:15:48
|
|
... results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp is ...
2024-12-09 19:27:37
|
|
... the oil sample to temperature 25,50 or 75℃,blow compressed air through the test oil,make make it stirred strongly.Air becomes small bubbles in the ...
2025-07-21 00:15:49
|
|
... spread, heat release and smoke production of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. EN 50399 ...
2025-07-21 00:15:48
|
|
... materials intended to protect against high contact temperature. The application of the standard is restricted to contact temperatures from 100 °C ...
2025-07-21 00:15:49
|
|
...loss of light transmission in test chamber, it can measure smoke density of burning and decomposition of building material during test. Features: ...
2025-07-21 00:15:49
|
|
... in test chamber, it can measure smoke density of burning and decomposition of building material during test. Features: The test chamber is Teflon ...
2025-07-21 00:15:49
|
|
... by radiant heat ASTM E 648: Critical Radiant Flux of Floor standard test - covering system uses radiant heat energy ASTM E 970: Using a Radiant ...
2025-07-21 00:15:48
|