81 - 90 of 112
grease dropping point test equipment
Selling leads
|
Introduction Coat the sample on a new bearing and run it for 60 seconds under a light thrust load to distribute the grease as it is used. The bearing ...
2025-07-24 00:16:01
|
|
Automatic Pensky-Martens Closed-Cup Flash Point Tester for Flashpoint Measurement Introduction: The Pensky-Martens Closed-Cup Flash Point Tester is ...
2024-12-09 19:39:37
|
|
... from 100mm high above and impact the specimen,then observe the damage of inner and outer margins of isolation and sheath. This equipment should be ...
2025-07-24 00:16:00
|
|
Fully Automatic Cleveland Open Cup Flash Point Analyzer Introduction According to test method of GB/T3536,this open cup flash point analyzer adopts ...
2025-07-24 00:16:01
|
|
ASTM D92 Fully Automatic COC Open Cup Flash Point Tester Introduction According to test method of GB/T3536,this open cup flash point analyzer adopts ...
2025-07-24 00:16:01
|
|
ASTM D1120 Equilibrium Boiling Point Tester for Engine Coolants Introduction This instrument tests the equilibrium boiling point of engine coolants ...
2024-12-09 19:27:52
|
|
Four Ball Machine for Wear Preventive Characteristics Testing of Lubricating Grease Introduction This four ball test machine uses four Ф12.7mm ...
2025-07-24 00:16:01
|
|
... power equipment. The water content value of SF6 gas should be measured in route test. SF6 Dew Point and Micro water content Test set is applied to ...
2024-12-09 19:27:52
|
|
Automatic Aniline Point Tester Introduction The Automatic Aniline Point Tester is used to determine the aniline point of petroleum products and ...
2025-07-24 00:16:00
|
|
Petroleum Oils Multifunctional Pour Point Tester This pour point apparatus is refrigerated by imported compressor made by Danfoss Denmark.Adopting ...
2025-07-24 00:16:01
|