71 - 80 of 149
circuit breaker timing testing
Selling leads
|
...test the abrasion resistant performance of printing on the wire completely automatically. Technical parameters: • Friction Load: 450g±5g • Friction ...
2024-12-09 21:50:32
|
|
... flame-resistant time standard and international automotive cable standards of low-voltage cables for automobiles unshielded horizontal flame test ...
2026-02-13 00:28:13
|
|
...Test Apparatus A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms ...
2026-09-30 07:30:38
|
|
...Tests heat release rate(H.R.R), smoke release, ignition time, oxygen consumption, carbon monoxide and carbon dioxide generation and mass loss rate ...
2026-10-23 00:06:25
|
|
...which is under certain test condition at 150C,with pressure of N2(CO2),the sample flows out from capilliary viscometer,according to flowing time ...
2026-10-23 00:06:26
|
|
...oil at high temperature and high shear rate. The test principle is to make the sample flow out from the capillary viscometer under the pressure of ...
2026-10-23 00:06:26
|
|
...standards GB/T 4510 and JTG E20-2011. It can do three tests at the same time in the same environment and calculate the average value. The cooling ...
2024-12-09 19:27:52
|
|
...m the mean time in seconds to achieve a temperature rise of 24±0.2℃ when testing by this method using a copper disc and a starting temperature of ...
2024-12-09 19:56:39
|
|
...Tests for Flame Propagation of Textiles and Films. According to different fabric weight, divided into 1 methods and methods 2. Features: ...
2026-10-23 00:06:26
|
|
... to flame test standard NF P92-501. The tester provides 30KW / m2 heat radiation, which may lead to volatile flammable gas sample and triggered the ...
2026-10-23 00:06:26
|