41 - 50 of 68
burning rate tester
Selling leads
|
...Rate Test Apparatus Introduction: The OSU heat release rate test apparatus, originally designed by Smith of Ohio State University in 1972, became ...
2026-07-31 00:32:57
|
|
...the vertical position under opposed flow conditions, and a classification system based on the rate and extent of the spread of flame. It provides ...
2026-07-31 00:32:57
|
|
...tester is widely used for the stripping force, pressure resistance and bending test of wires, cables, terminals etc. Standards: • GBT 25085-2010 ...
2024-12-09 21:42:52
|
|
... in the grip, and add a certain load, the grip swing around during the test, after a certain number of times, view the disconnection rate; or when ...
2024-12-09 21:42:52
|
|
Product description: Wire and cable bending and torsion tester is according to pre-set test conditions (bending angle, bending rate, number of trials)...
2024-12-09 21:54:49
|
|
... insulated cables flexibility tester is suitable for the two-core and three-core sheathed cable that conductor cross-sectional area is 1.5mm2 or ...
2024-12-09 21:54:49
|
|
... Cut-through Tester is used to test the insulation strength of railway locomotive and vehicle cables. Squeeze the surface of the finished cable ...
2026-03-01 07:30:17
|
|
... control technology. The heating rate is fast, the temperature is more controlled, and the test results are more accurate. The large LCD screen ...
2026-03-27 07:30:19
|
|
Introduction The instrument is suitable for detecting the drop melting point of petroleum wax and grease. The instrument adopts computer automatic ...
2024-12-09 20:42:10
|
|
Introduction The sample circulates for 1064h at 88 ºC and a certain flow rate in a closed system composed of a reservoir, a water pump, a radiator and ...
2026-07-31 00:32:57
|