21 - 30 of 39
aviation material heat release tester
Selling leads
|
Introduction By configuring different test devices, many aviation fuel combustion test standards can be met, such as seat combustion test, burnthrough ...
2024-12-09 21:13:46
|
|
Introduction NF P 92-504 for the determination of horizontal flame spread rate of materials. This method also applies in other rapidly melting and ...
2026-04-29 00:14:53
|
|
... material specimen under external heat radiation conditions, It is an important index of combustion classification for building products. According ...
2024-12-09 19:27:37
|
|
... to flame test standard NF P92-501. The tester provides 30KW / m2 heat radiation, which may lead to volatile flammable gas sample and triggered the ...
2026-04-29 00:14:53
|
|
... such as heat distortion temperature and Vicat softening point temperature. It is an essential quality control equipment for institutes, universiti...
2024-12-09 21:56:45
|
|
Introduction: The CCT Cone Calorimeter is designed and manufactured according to international standards and mainly for building products and electric ...
2026-04-29 00:14:53
|
|
General Introduction Halogen, PH & conductivity tester is used to measure gas volume of Halogen Acid (IEC 60754-1), pH concentration (PH Meter, ...
2026-02-12 19:38:12
|
|
... spread, heat release and smoke production of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. EN 50399 ...
2026-04-29 00:14:53
|
|
... spread, heat release and smoke production of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. EN 50399 ...
2026-04-29 00:14:53
|
|
..., flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is originated from ISO 5658-2 ...
2026-04-29 00:14:53
|