71 - 80 of 192
astm d2863 tester
Selling leads
|
Purpose and scope This Low Temperature Cold Filter Point Tester is applicable to the standard of SH/T0248, ASTM D6371 and is used to determine the ...
2025-12-20 01:18:20
|
|
Product Description The ASTM D1177 Automatic Freezing Point Tester is designed and made as per the National Standard of People's Republic of China ...
2025-12-20 01:18:20
|
|
... the cold-cranking simulator (CCS method) and American ASTM D5293.At the temperature range: -35℃∼-5℃,the interval 5℃ temperature condition , and ...
2025-12-30 00:26:30
|
|
General Introduction The Automatic Lubricating Oil Evaporation Loss Tester (Noack B method) is designed and manufactured according to Industry ...
2025-12-30 00:26:30
|
|
General Introduction This Dropping Point Tester of Lubricating Grease is designed and made as per the national standard of People's Republic of ...
2026-01-14 00:29:14
|
|
...Tester is designed and made as per T0604Penetration Test for Bituminous Materials in JTG E20 Specification and Test Methods of Bitumen and ...
2026-01-14 00:29:14
|
|
...-Determination of Aniline Point and Mixed Aniline Point. The standard GB/T262 is refer to standard ISO2977. It is also suitable for test method E ...
2026-01-14 00:29:14
|
|
General Introduction This Automatic Engine Oil Apparent Viscosity Tester (Auto Sampling) adopts the Cold Cranking Simulator (CCS) method to determine ...
2026-03-15 00:28:15
|
|
... ignition without any flammable gas, fully meeting the requirements of ASTM D92 (GB 3536-2008) and GB 267-88. It is equipped with a high-performanc...
2026-03-27 07:30:19
|
|
Product Description The Fully Automatic Pensky-Martens Closed Cup Flash Point Tester adopts the standard ASTM D93 and ISO2719 test methods, and uses ...
2026-03-27 07:30:19
|