161 - 170 of 313
aging characteristics test instrument
Selling leads
|
... spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is ...
2025-07-29 00:09:47
|
|
...Test Set Introduction This Evaporation Loss Test Set is suitable to measure evaporation loss of lubricating oil and grease.Put the sample placed in ...
2024-12-09 19:27:52
|
|
...ch as gear oil). The use method is: the sample is injected with constant pressure dry air at a certain temperature, and the test lasts for 312 ...
2024-12-09 21:12:26
|
|
... hydraulic fluid. During the test, the sample, water and copper strip instrument shall be sealed in the pressure resistant glass, and then placed ...
2024-12-09 21:12:26
|
|
Acidity of Gases Evolved Degreen Measuring Instrument Introduction The International Electrotechnical Commission IEC 60754 Part 1 and Part 2 test is ...
2025-07-29 00:09:47
|
|
Needle flame tester by IEC60695-2-2 Introduction Needle Flame Tester is designed according to international standards IEC60695-2-2 and IEC60695-11-5...
2025-07-29 00:09:47
|
|
... brake systems of motor vehicles. The principle involves immersing the rubber cup or rubber test piece in the brake fluid, maintaining it at a ...
2024-12-10 00:37:04
|
|
... borderline pumping temperature,yield stress at low temperature and apparent viscosity of engine oils.The temperature controlling range is -5℃～-40℃...
2025-07-29 00:09:47
|
|
... relative density of engine coolants and engine coolant concentrates.The structure is separated,and operatio is easy.It is highly improve the ...
2024-12-09 19:27:52
|
|
...Testing Equipment (Induction Period Method) Introduction This oxidation stability testing equipment is used to determine the stability of gasoline ...
2024-12-09 19:36:23
|