1 - 8 of 8
304 ss body suction box
Selling leads
|
...Suction Box 304 S.S Body HDPE Faceboard 1. Structure: water leg type vacuum dewatering box (Wet suction box) is a low-vacuum (20-100 mm water ...
2024-12-09 22:44:34
|
|
... 6 bearing seat cast iron The vacuum couch roll is located at the end of the wire section of the paper machine. Its structure is basically the same ...
2024-12-09 17:44:28
|
|
.... It is fixed on a closed box by several panel strips with sharp front edges. Wide box surface. The panel material is the same as the foil box ...
2024-12-09 22:44:34
|
|
.... Both ends of the panel are equipped with adjusting blocks to adjust the width of the suction opening of the paper sheet. The felt suction box is ...
2024-12-09 13:43:39
|
|
...Body And Ceramic Face Board Waterleg Wet Suction Box 1. Structure: water leg type vacuum dewatering box (Wet suction box) is a low-vacuum (20-100 ...
2024-12-09 18:10:28
|
|
The water leg type vacuum dewatering box in the fourdrinier paper machine 1. Structure: water leg type vacuum dewatering box (Wet suction box) is a ...
2024-12-09 13:01:37
|
|
Double Slot Stainless Steel High Vacuum Felt Water Suction Box Of Paper Making Machine Press Part Material: The box body is welded by stainless steel, ...
2024-12-09 18:10:28
|
|
... component for drawing paper from the wire section to the press section, and is composed of a roller body, a vacuum box body, a water spray pipe, ...
2024-12-09 13:01:37
|