PLC Control Automatic Face Mask Making Machine One To Three Line Low Noise
|
|
One To Three Line Face Mask Making Machine Automatic PLC Control Low Noise
1. Equipment size: 6150mm (L) × 3720mm (W) × 1950mm (H) (excluding receiving line) 2. Appearance color: international standard warm gray 1C (DB standard color), according to this standard without special instructions 3. Equipment weight: ≤5000kg, ground load ≤500KG / m2； 4. Working power: equipment 220VAC ± 5 ﹪, 50HZ, rated power about 9KW 5. Compressed air: 0.5 ～ 0.7 MPa, the use flow rate is about 300L / min 6. Operating environment: temperature 10 ～ 35 ℃, humidity 5-35% HR, no flammable or corrosive gas Body, no dust (cleanliness no less than 100,000) 7. Production efficiency: 90-130PCS / MIN; 8. Equipment production pass rate: 99% (except when the incoming materials do not meet the requirements or the employees' improper operation is excluded) 9. Equipment failure rate: 2% (refers to the failure caused by the equipment itself)
Technical Parameter
Equipment installation and configuration requirements
Equipment size: 4200mm (L) x 1100mm (W) x 2200mm (H); Equipment weight: 1600 KG Working voltage: AC220V, 50 / 60HZ, rated power: 4KW Compressed air: 0.5-0.7Mpa Use environment: temperature 10-35 ℃, humidity 5-35% HR, no flammability, corrosive gas, no dust (cleanness not less than 100,000)
1. High stability, low failure rate, beautiful appearance without rust. 2. Computer PLC programming control, servo drive, high degree of automation. 3. Photoelectric detection of raw materials to avoid mistakes and reduce waste. 4. The automatic mask making machine is automatic from material
feeding to mask collection. 6. The ultrasonic technique does no harm to the characteristic of
the material. Easy and safe operation.
This Non Woven Face Mask Making Machine is a fully automatic one-to-two mask machine, one body machine drives two ear band machines. After the main body machine outputs the mask body, the mask body sheet is conveyed to the turning mechanism by a conveyor belt structure. The reversing mechanism is used to flip the mask plate onto the belt connected to the ear band machine, and then the mask sheet is conveyed to the first mask plate on the front of the ear band machine through the conveyor belt, and finally the mask sheet is placed on the ear band by the cylinder pressing In the mask plate of the machine, the ear band machine is used to complete the welding of the ear bands of the mask and the edging, thereby completing the production of an ear band mask product. This machine adopts PLC, touch screen control, single-phase motor for main conveyor belt, stepping motor turning, precise transmission, stable control and adjustable speed.
1. Prompt deliver at the very day.
|
||||||||||||||||||||
| Product Tags: mask making equipment non woven mask making machine |
|
PLC Control Automatic Face Mask Making Machine One To Three Line Low Noise |
|
220V 50Hz Power Input Face Mask Manufacturing Machine Servo Drive 3 Line |
|
Heavy Duty Automatic Face Mask Making Machine Stable Operation Low Scrap Rate |
|
Semi Auto Mask Making Equipment , Non Woven Mask Making Machine ISO CE |
|
Ultrasonic Automatic Face Mask Making Machine With Intelligent Computer |
|
High Capacity Disposable Mask Making Machine , Surgical Mask Making Machine |