Static Flexibility Cable Testing Machine For Completed Flexible Cables
|
|
Static Flexibility Tester HDX1303
Feature:A sample with a length of 3m±0.05m shall be tested in an apparatus similar to that shown in figure 2. Two clamps, A and B, shall be located at a height of at least 1.5m above ground level. Clamp A shall be fixed and clamp B shall move horizontally at the level of clamp A. The ends of the sample shall clamped vertically (and remain vertical during the test), one end in clamp A, the other in the movable clamp B which shall be at a distance /=0.20m from clamp A. The cable takes roughly the shape indicated figure 2 by the dotted lines. The movable clamp B shall then be moved away from the fixed clamp A until the loop formed by the cable takes the shape, indicated in figure 2 by the heavy outline, of the U enclosed wholly between two plumb lines through the clamps and set up tangentially to the external generatrix of the cable. This test shall be done twice, the cable being turned in the clamp, after first test, through 180°.
Parameters:
Standard:IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.2 and Figure 2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. Application:It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2 and cables having more than 18 cores laid up in more than two concentric layers. Test sample:Completed flexible cables.
Services:
Primary products:
Laboratory Test Equipment Appliance Test Equipment Medical Device Testing Equipment Waterproof Test Equipment Dust Testing Equipment Flammability Testing Equipment Electric Testing Equipment Impact Testing Machine Cable Testing Machine Vibration Test Equipment Light Testing Equipment Communication Test Equipment Plug Socket Tester Leak Test System
We are looking forward to long term cooperation with customers, we will make best service and after sales service for all of our customers. If you have any inquiry, please don’t hesitate to contact us. We will reply you at the first time as we can. |
||||||||||
| Product Tags: wire testing equipment cable testing equipment |
|
220V 50Hz Cable Testing Machine Abrupt Removals Test Apparatus 6 Stations |
|
Flexible Cable Flex Tester HDX1302 0-400V Voltage Loading IEC60245-1 |
|
0.33m/S Speed Cable Testing Machine , Cable Flex Tester For Mechanical Strength |
|
Static Flexibility Test Equipment IEC60245 1 For Flexible Cables |
|
2 Stations Cable Testing Machine , Cold Bending Test Machine HDX1307 |
|
Manual Control Cold Bending Strength Testing Machine IEC60811 1 4 |