Square / Rectangular Hole Shape Woven Wire Mesh Screens

Low Carbon Plain Steel Wire Mesh Cut Circles / Round Screen Filter Mesh Disc

Material: Stainless steel, phosphor-bronze, nickel, low carbon steel, copper, brass
Wire Diameter: 0.017-2.03mm
Weave Style: Plain weave, Twilled weave, Dutch weave
Roll width: 0.9144m,1.05m,1.22m,1.524m,1.83m (3', 3.5', 4', 5', 6')
Length: 30.5m or as requested
Sample: Available

Production process for plain steel wire mesh
1. Raw material checking - Test wire diameter, wire mechanical property and chemical composition.
2. Wire Warping - Roll the wires all over the bobbin creel which is part of weaving machine.
3. Mesh Weaving - Get the weaving machine started to work
4. Quality Inspecting: Check if mesh surface and specification conform to the custmer requirements.
5. Epoxy Coating: Take electrostatic powder coating
6. Quality rechecking: Check if the situation of hole blockage exist
7. Edge Cutting: Cut the extra edge off
8. Packing - Put the mesh roll to the certain package and then store in the finished product warehouse.
 

Outer package available (same inner packing: water-proof paper and pvc bag):
1. Plastic woven bag 2. Wooden case 3. Wooden Pallet

We finished above mentioned products using our own equipment facility, so on basis of competitive cost, quality can be under good control without any rough-handling which is always existed in the outside processing plant.

If you have any inquiry for the plain steel wire mesh, please feel free to ask.