Mining Machine Cast Steel Mill Girth Gear For Ball Mill Sag Mill

Mining Machine Cast Steel Mill Girth Gear For Ball Mill Sag Mill

1. Manufacturing process of big tooth ring for mill girth gear

(1) Blank

The steel casting blank is provided by the heavy casting and forging Plant of CITIC Heavy Industry Machinery Co., LTD. It is implemented in accordance with gb11352-89 standard. Molding, smelting, pouring, box beating, cleaning and dressing castings according to casting process requirements; During the inspection and acceptance, the cast steel blank shall be checked according to the drawings and technical requirements, and the process shall be put down after passing the acceptance according to JB/T6402-92 standard.

(2) Rough machining

Draw lines according to the requirements of the drawings and set aside processing allowance, alignment, connection, processing inner and outer circle, milling joint surface, drilling and other processes.

(3) Agent injury

Ultrasonic inspection shall be carried out on the whole, and the internal quality shall meet the secondary requirements of GB7233-87 standard.

(4) Normalizing pretreatment

The half ring is normalized and tempered in pairs to provide good microstructure for subsequent surface quenching. And according to the requirements of the drawings to check the deformation of half gear ring after heat treatment.

(5) Machining

The first two half ring with high strength bolt connection into a whole ring, according to the requirements of the drawings processing of the whole ring circle and upper and lower end, and then according to the drawings and machining requirements for milling teeth.

(6) Eliminate machining stress

The integral ring is annealed to eliminate stress.

(7) Surface quenching of integral gear ring

Tooth surface medium frequency induction quenching along the tooth groove, hardness HRC50~55, effective hardening layer depth 3~5mm.

(8) Final inspection

Firstly, test whether the hardness of each groove of the gear ring after intermediate frequency quenching and tempering meets the requirements of the drawing; Secondly, detect whether the size of the maximum outer diameter D6944 is too large, such as the deformation of 3mm, need mechanical correction until qualified; Thirdly, for magnetic particle inspection of gear teeth and transition fillet, the quality should meet the secondary requirements stipulated in GB/T9444-88 standard; Finally, according to the drawings and technical requirements for the final inspection.

2. Product parameters of big ring for mill girth gear

3. Case introduction of large ring gear

The gear ring with the largest modulus in China -- The gear ring is manufactured by Zhongshi Heavy Machinery Co., LTD., with the diameter of the outer circle of 6.39 meters and the hobbing modulus of the gear reaching 45, which is the highest in China.

China's largest diameter ring gear - On August 7th, 2011, the largest diameter ring gear designed and manufactured by CITIC Heavy Industries was being finished by the Reassembly Department and was about to roll off the assembly line. The ring, which is nearly 11 meters in diameter and weighs more than 70 tons and has a level 7 precision, was made by Citic Heavy Industries for China National Gold Group Corp.

Through testing, the precision of all parameters of the gear ring meet the design and process requirements. The successful manufacture of the ring gear is another masterpiece in the process of Zhongxin Heavy Industry to build a leading domestic and internationally famous modern enterprise, which lays a solid foundation for Zhongxin Heavy Industry to manufacture a larger diameter ring gear in the next step.

Mill Girth Gear

Mill Girth Gear

Mill Girth Gear

Mill Girth Gear