Mud Cleaner System Of MG Pro Series For Drilling Mud, HDD, mining
and water-well
Hydrocyclone cleaner system high-efficiency for the entire
circulating volume
Hunter MG Pro mud cleaner systems use a two-stage separation
process for enhanced drilling fluid recovery. This design enables
our mud cleaners to handle the entire circulating volume and remove
any dry solids while retaining premium base fluid, which is vital
to drilling success.
Effective for weighted and unweighted fluids
Hunter MG Pro mud cleaner systems are equally effective for both
weighted and unweighted drilling fluids and effectively lower both
drilling fluid expenses and disposal costs.
Hunter MG Pro mud cleaner system features:
- standard design with various treating capacity, 500gpm, 1000gpm,
1500gpm
- the large shaker screen area to dry the solids and recycle more
fluids
- compact footprint, container shipping suitable
- Easy maintenance, stainless steel valve on each hydro-cyclone can
make the replacement of cone easier, you do not need to stop the
whole machine.
How MG Pro Mud cleaner system Works
Our two-stage process is achieved by a combination of
hydro-cyclones mounted over a shale shaker to operate as a single
unit. The hydro-cyclones make the primary separation with underflow
directed onto the shaker vibrating screen.
Desander high-volume desanding cleaner
Removes sands and abrasive cuttings from 95% of all particles up
to 74 micron to more than 50% of particles up to 40 micron.
Desilter high-volume desilting cleaner
Features exclusive polyurethane cones with a unique 20° taper angle
and a twin-cone design with 50% greater capacity than other 4-in
cones.
Mud Cleaner System Specifications:
| Model | Hunter 50 | Hunter 90 | Hunter 120 | Hunter 200 | Hunter 240 | Hunter 320 |
| Capacity | 50m³/h | 90m³/h | 120m³/h | 200m³/h | 240m³/h | 320m³/h |
| Desander Size | 8 inch | 10 inch |
| Desander Qty | 1 Pcs | 2 Pcs | 3 Pcs |
| Desilter Size | 4 inch |
| Desilter Qty | 4 Pcs | 6 Pcs | 8 Pcs | 10 Pcs | 12 Pcs | 16 Pcs |
| Work Pressure | 0.25~0.45 MPa |
| Separate Point | 15μm～74μm |
| Bottom Shaker | Model | Hunter Mini | Hunter D3 | Hunter MG4 |
| Vibration Mode | Linear Motion |
| Vibrator Motor | 2×0.75Kw | 2×1.72Kw | 2×1.72Kw |
| G Force | ≤7.5G |
| Deck Angle | 2° | -1 - +5° |
| Screen Area | 1.35㎡ | 2.27㎡ | 2.73㎡ |
| Screen Panel | 2 Pcs | 3 Pcs | 4 Pcs |
| Dimension (mm) | 1650×1250×1750 | 1650×1250×1900 | 1650×1250×1900 | 2455×1850×2250 | 2455×1850×2250 | 2850×1800×2250 |
| Weight(Kg) | 1100 | 1600 | 1650 | 2100 | 2150 | 2350 |
| Remark | 4" cone =12~15m³/h, 8"cone=30~35m³/h,10"cone=90~120m³/h. It can be
configured according to clients' demand |
