API Spiral Drilling Mud Cleaner 12 Inch Hydrocyclone Desander 240m3/H
|
Desander API Drilling Mud Process 6- 12 Inch Polyurethane Hydrocyclone Customized
Drilling fluids desander for different mud systems. Which is the 2nd phase of solids control equipment in the whole mud system. But for different mud systems, the desander configuration varies from each other.
Drilling fluids desander technical parameters
The desander cone is sized from 6″ to 12″ for the drilling mud process. The most popular one is 10″. And cones are made of high-quality polyurethane since their high ability to resist abrasion. According to different flow rate demands, the desander will be configured with different numbers of cones. The drilling fluids are pumped from the shaker tank by a centrifugal pump. Under the pressure and gravity effect, there will be a swirl in a cone. Then the centrifugal force pushes heavier material down to the cone drop in Apex and light fluids flow out of the discharge line upside.
Main Features of Our Drilling Desander
Pure polyurethane or high-chromium for hydrocyclones.
Desanders are used to remove suspended solids from liquid process streams. One of the primary applications is to improve the quality of wastewater. Treatment of wastewater normally involves multiple process steps to remove the impurities and ensure that the final effluent discharge is compliant with regulatory specifications. A simplified breakdown of the steps involved is as follows:
Each step can be accomplished through a number of process units depending on the complexity of the operation and the potential contaminants present. A desander fits into the solids removal step of wastewater treatment.
How many different desander for drilling mud systems?
Besides oil drilling mud desander, there is desander used in the mud recycling systems. Such as HDD or piling, slurry separation or tunneling, and so on
Different use will request different size cones. Such as for piling, they may request a 14″ or larger cone. For HDD, especially for the smaller rigs, the system may request 6” or just desilter instead of desander
And even for the same use, there will be different configurations according to capacity. For example, ZJ40 may request a mud system circulation rate of around 200m³/h, while ZJ70 may request 360m³/h. So, the shakers, drilling fluids desander and other equipment holding the same flow rate will be configured in the system accordingly
Mud desander options
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Tags: 240m3/H Hydrocyclone Desander Drilling Mud Hydrocyclone Desander Spiral Drilling Mud Desander |