PU Foam For Public Chairs Public Seats Materials Blend Polyol Isocyanate
|
Detailed Product Description
|
PU Foam for Public Chairs Public Seats Materials Blend Polyol Isocyanate
Description Polyurethane foam for public seats Component A material (POLY) is polyether polyol mixing additives.
Foaming Parameter
Operation introduction Before using, mix the Component A evenly, add colorant and an appropriate amount of foaming agent, stir evenly again, and add it to the POLY raw material tank for later use. When using, the raw material temperature is controlled at 20-30 degrees, the mold temperature is 40-45 degrees, A material/B material =100/45-47, when adding 0.5% of H002, the ratio of A material/B material =100/47-49, and so on.
Notes: The raw materials cannot come into contact with moisture in the air
and need to be sealed and stored properly. |
||||||||
| Product Tags: PU Foam For Public Chairs PU Foam For Public Seats Public Seats Materials Blend Polyol Isocyanate |
Related Products
|
Polyurethane Rigid Foam Integral Skin Foam for Soft Seats Materials Blend Polyol Isocyanate for Soft Seats |
|
Integral Skin Foam For Soft Seats Materials Blend Polyol Isocyanate |
|
Polyurethane Rigid Foam for Public Seating and Chairs and Durable for High-Traffic Areas |
|
PU Foam For Public Chairs Public Seats Materials Blend Polyol Isocyanate |
|
B2 Grade Fire Retardant Polyurethane Foam Insulation |
|
Polyurethane Rigid Foam insulation For Household Appliance |
Email to this supplier