901 - 910 of 1083
vertical flammability testing equipment
Selling leads
|
...Test Device Equipment overview: The coupler heating test device is designed and manufactured according to IEC60320-1 clause 18.2 and figure 13. It ...
2024-12-09 19:52:24
|
|
...Figure 19 Coupler Lateral Pulling Test Apparatus Equipment overview: Th coupler lateral pulling test apparatus is manfactured according to the ...
2024-12-09 19:52:24
|
|
... for power distribution in public networks IEC 61587-1:2007 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 ...
2025-05-28 22:34:30
|
|
...Test Probe Product overview: The unjoint test probe of figure V.1 conforms to the requirements of IEC 62368-1:2018 clause V.1.3 and figure V.1 (but ...
2024-12-09 21:01:33
|
|
... purpose is to prevent the device that is intended to be inserted into a fixed output socket and equipped with a pin to not subject the output ...
2024-12-09 20:24:44
|
|
...Test Apparatus Product information: The low temperature impact test apparatus meets the requirements of IEC 60884-1 2013 clause 24.4, 30.4, figure ...
2024-12-09 19:35:19
|
|
IEC 60320-1 Coupler Maximum Minimum Force Withdrawal Test Apparatus Equipment overview: The coupler withdrawal testing apparatus is designed and ...
2024-12-09 19:52:24
|
|
... is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a ...
2024-12-09 22:49:27
|
|
...Probe Experiment Device Used With The Testing Probe IEC 62196-1 Product information: This equipment meets the requirements of IEC 62196-1:2022 ...
2025-03-06 22:28:40
|
|
...1.1,1.2 (IEC 60811-401 and 501), Table 1 IEC 60811-1-1 Figure 12~15, etc. It can be equip with various dumbbell dies according to the needs for ...
2025-07-30 00:08:41
|