101 - 110 of 219
verification clamping testing machine
Selling leads
|
... to IEC 60884-1: 2022 Annex C alternative gripping tests figure C.2, the reference plug as per C.1 also below shown: Technical Parameters For Plug ...
2025-03-06 22:31:28
|
|
...Test Apparatus For Pressure Resistance Test Product Information For Hydraulic Pressure Test Apparatus: This testing machine conforms to IEC60335-2...
2025-03-06 22:31:12
|
|
... spirit pressure test machine meets the requirements of IEC 60335-1 clause 22.32. It is use to determine if ceramic material is tightly sintered. ...
2025-03-06 22:31:26
|
|
...Test Equipment For Verifying Lenses With Threaded Lens Barrels Product Overview For Lens Rotation Torque Test Equipment: The testing machine is ...
2025-03-06 22:30:49
|
|
...: 1. A reference plug required: the reference plug should be made according to IEC 60884-1 Annex C Figure C.1.Surface roughness 0.5 μm ~ 0.8μm. 2. ...
2024-12-09 19:46:29
|
|
...Testing Apparatus For The Effectiveness Of Cable Product Information For Cord Retention Testing Apparatus: This device conforms to the standard ...
2025-07-12 00:13:46
|
|
... conditions of water heaters. Product Features: 1. Adopts PLC central control (computer control is optional), the pulse and pressure withstand ...
2024-12-09 19:10:13
|
|
... servo motor, equipped with Mitsubishi PLC, 7-inch touch screen. It is a dedicated high-end torque test equipment with threaded lens sleeve. This ...
2024-12-09 19:55:37
|
|
...Test Apparatus IEC 60335-1 Standards & Clauses: This ceramic material fushine spirit pressure test machine meets the requirements of IEC 60335-1 ...
2024-12-09 20:08:06
|
|
...Test Apparatus Standard: IEC60884-1 clause 12.2.5, figure 11. Application: It is used to check terminals with screw clamping shall be so designed ...
2024-12-09 19:26:34
|