1 - 10 of 75
vehicle connector drop test machine
Selling leads
|
...Vehicle Connector Drop Test Machine Product information: The test device complies with the requirements of IEC 62196-1Ed. 4CDV 2020 Article 26.3, ...
2025-03-06 22:32:01
|
|
...Vehicle Connector Drop Testing Equipment Product information: This testing device is required by IEC 62196-1Ed.4CDV 2020 clause 26.3, fig 19. It is ...
2024-12-09 19:39:07
|
|
...e adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the ...
2025-07-15 00:10:52
|
|
...Drop Test Machine For Test Performance Of Medical Beds Product Overview: 1. Standard: conform to YY9706.252-2021 clause 201.15.3.4.1, IEC60601-2-52...
2025-03-06 22:29:34
|
|
...: This device is suitable for checking whether plug-ballast/transformers and mains socket-outlet-mounted luminaires have adequate mechanical ...
2025-07-15 00:10:51
|
|
...Drop Test Machine Product information: It is conforming to IEC62133-1:2017 clause 7.3.3, IEC62133-1:2017 clause 7.3.3, IEC60086-4 clause 6.5.4, IEC ...
2025-05-28 22:34:33
|
|
...-4 clause 6.5.4, IEC 60086-1, etc. This machine applies for small consumer electronic products like mobile phone, mobile batteries, interphone, ...
2025-05-28 22:34:34
|
|
... 26.3, figure 19. It is used to test the mechanical strength of rewirable plugs and vehicle connector which is equipped with flexible cable. Test ...
2025-03-06 22:30:57
|
|
....3, fig 15, table 8 and table 9, IEC60309-1: 2012 clause 20 and clause 21, etc. It is used to verify whether electrical accessories such as ...
2025-07-15 00:10:52
|
|
... of IEC60309-1 clause 20 and clause 21, IEC62196-1 clause 7.11 and clause 7.12 and etc. It is used to verify whether electrical accessories such as ...
2025-07-15 00:10:51
|