71 - 80 of 237
vehicle components condensation test equipment
Selling leads
|
IEC 60335-1 12.5kV 1.2/50 μs Transient Voltages Test Generator Product information: This impulse voltage test generator is required by IEC60335-1 ...
2026-09-08 00:29:58
|
|
IEC60695-2-10 Glow Wire Test Apparatus With Computer Control This advanced fire hazard testing equipment simulates thermal stress from glowing ...
2026-06-11 18:47:38
|
|
...IEC60695-2-13, it is required by IEC 60335 clause 30, IEC 60598, UL746A, etc. This device simulates the thermal stress test of glowing component or ...
2026-09-08 00:29:57
|
|
...damage of products and individual components in the actual working environment. Its working principle is similar to that of a speaker, that is, the ...
2026-09-08 00:29:58
|
|
... 9.34, etc. The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over ...
2026-09-08 00:29:59
|
|
Vehicle Switch-Outlet Interlock Withdrawal Force Test Apparatus IEC 62196-1 Product InformationN For Vehicle Switch-Outlet Interlock Withdrawal Force ...
2026-06-11 18:49:01
|
|
... information: The test equipment is used to verify accessories shall be so constructed that the temperature rise in normal use is not excessive. It ...
2026-06-11 18:48:30
|
|
....3, fig 15, table 8 and table 9, IEC60309-1: 2012 clause 20 and clause 21, etc. It is used to verify whether electrical accessories such as ...
2026-09-08 00:29:59
|
|
... clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. It is used to verify whether electrical accessories such as electric ...
2026-09-08 00:29:59
|
|
...: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull ...
2026-09-08 00:29:59
|