61 - 70 of 70
vehicle charging plug misalignment test apparatus
Selling leads
|
... of electric vehicles - Part 1: General requirements" Section 7.11.3 GB/T11918.1-2014 Chapter 24.3. Samples and restrictions: Charging gun ...
2026-09-08 00:29:59
|
|
...Load Test System for EV Charging Connectors with PLC Control The Vehicle Drive-Over Crushing Test System evaluates the mechanical resistance of ...
2026-09-08 00:29:59
|
|
... interfaces, industrial plugs, socket-outlets and couplers can withstand the mechanical, electrical and thermal stresses that occurred during ...
2026-09-08 00:29:59
|
|
... under vehicle crushing conditions. This system simulates real-world scenarios where EV charging connectors may be accidentally run over by a ...
2026-09-08 00:29:59
|
|
...-1: 2012 clause 20,21,22, IEC60998, IEC60669. IEC61058, IEC60439, EIA-3 64-70 and other standards. It is suitable for the electrical plug-in life, ...
2026-09-08 00:29:58
|
|
...23.3, fig 15, table 8 and table 9. Product information: This test equipment meets the requirements of IEC 62196-3: 2020 clause 22 and 23, IEC62196...
2026-09-08 00:29:59
|
|
IEC 62196-1 Air Saturated Test Chamber Rust Corrosion Steam Testing Equipment For Plug Testing Product Information: The Air Saturated Test Chamber is ...
2026-06-11 18:49:36
|
|
... 60309-1: 2012 clause 22, etc. It is suitable for detecting the temperature rise test after the charging pile interface plug and socket pass the ...
2026-06-11 18:48:35
|
|
IEC60309-1 2012 8 Channels Connector Temperature Rise 0 To 400°C Test System Equipment Overview: The equipment provides a low voltage test voltage to ...
2026-06-11 18:49:06
|
|
IEC60309-1:2012 Connector temperature rise 0～400℃ test system Equipment Overview: This equipment provides a low-voltage test voltage to the sample ...
2026-06-11 18:48:38
|