71 - 80 of 113
test probe with dynamometer
Selling leads
|
... V.1.6,. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection ...
2026-06-11 18:50:57
|
|
...Test Probe 2C For Bare Parts Of TNV Circuits Protection Test Product information: Standards: Conforms to IEC60065:2014 Annex B, IEC 62151 Figure 3, ...
2026-06-11 18:52:12
|
|
... Sphere Test Probe Standards & Clauses: The φ75mm test rod meets the standard requirements of IEC 60335-2-24 clause 21.102. Application It is used ...
2026-06-11 18:49:48
|
|
...Test Probes Product Information: These precision-engineered measuring gauges are designed according to IEC 60884-1:2022 clause 9 and are used for ...
2026-06-11 18:52:18
|
|
IEC60335-2-14 Hand-held blenders φ40 mm Cylinder Rod Test Probe Standard and Application: The φ40mm cylinder rod meets the standard requirements of ...
2026-06-11 18:50:14
|
|
...Dynamometer with 1.05N/mm Spring Constant Product Overview: The spring dynamometer conforms to IEC 60335-2-25 clause 21.101. It is used to apply ...
2026-06-11 18:41:03
|
|
...verify the protection against access with a wire. Technical parameters: Model SN2210-4 SN2210-4T (Optional) Name Test rod probe D Test rod probe D ...
2026-06-11 18:48:50
|
|
Push and Pull Dynamometer Standards: This device is required by IEC 60335-1 & IEC 60884-1 and etc. Feature: 1. High precision and high resolution; 2. ...
2026-06-11 18:53:19
|
|
...Annex V.1.6 The Test Rod Probe with 1N Force Product information: This probe conforms to the standard requirement of IEC61032 test probe D, ...
2026-06-11 18:52:58
|
|
...Probe Test Device for EV Connector Electrical Safety Testing Professional electrical safety testing equipment designed to verify protection against ...
2026-06-11 18:49:41
|