61 - 70 of 115
temperature and humidity test chamber
Selling leads
|
... chamber is required by IEC 60068-2-14 (Test Na) and it is required by IEC 62196-1Ed.4CDV 2020 clause 34.3. The hot and cold impact (thermal shock) ...
2026-06-11 18:48:33
|
|
...Temperature Change Test Chamber Standards: IEC60068-2-1:2007 "Environmental Testing-Part 2-1:Tests-Test A:Cold,IDT" IEC60068-2-2:2007 ...
2026-06-11 18:48:43
|
|
...Temperature Waterproof Test Equipment Overview: The high pressure and high temperature testing chamber is used to verify the protective performance ...
2026-09-08 00:29:59
|
|
...electric and electronic products, components and other materials high low temperature test, temperature change, damp heat etc. Environment simulate ...
2026-06-11 18:44:40
|
|
...electric and electronic products, components and other materials high low temperature test, temperature change, damp heat etc. Environment simulate ...
2026-06-11 18:44:47
|
|
...Test Chamber Product information: It conforms to IEC62133-1:2017 clause 7.3.5, IEC62133-2:2017 clause 7.3.4, IEC61960, IEC60086-4 clause 6.5.7, IEC ...
2026-06-11 18:44:42
|
|
...Test Chamber Product Information: This air saturated test chamber is required by IEC 60898-1:2015 clause 9.16, IEC 61009-1:2012, etc. It is used to ...
2026-06-11 18:44:19
|
|
...Test Chamber Product information: It conforms to IEC62133-1:2017 clause 7.3.7, IEC60086-4 clause 6.4.1, IEC 60086-1, UN 38.3, UL 1642, IEC61960, ...
2026-06-11 18:44:43
|
|
...n driving through puddles. The test serves to verify functioning of the component when subjected to shock-type cooling by means of water. This ...
2026-06-11 18:47:49
|
|
... is applicable for the aging test of the electric wire, the insulation layer and sheath of the rubber (plastic, artificial leather) as well as ...
2026-06-11 18:43:14
|