381 - 390 of 414
surface temperature test probe
Selling leads
|
IEC 60811-508 Figure 1 High Temperature Indentation Device 3 Stations Product Introduction: This test device conforming to the standard of IEC 60811...
2026-06-11 18:50:00
|
|
...h Temperature Humidity Chamber Two Stations Product Overview The Switches Endurance Tester is designed and manufactured according to the standard ...
2026-06-11 18:52:25
|
|
...test probes separately confirm to the IEC 60884-1:2013 clause 10.5, figure 9 and figure 10. The SN2110 test probe with 20N force is used to test ...
2026-06-11 18:53:23
|
|
...10. The SN2211-5 test probe with 20N force and the SN2211-6 test probe with 1N force. Technical parameters: 1. Gauge "A" with force of ...
2026-06-11 18:48:31
|
|
... 21 figure 9 and figure 10, IEC 62196-1:2020 clause 10.2, and etc. The SN2110 test probe with 20N force is used to test whether the live parts ...
2026-06-11 18:48:52
|
|
...force during microwave oven mechanical strength test. Technical Parameters: Spring constant 1.05N/mm Force applied face Ф10mm Force applied range ...
2026-06-11 18:41:03
|
|
...Temperature and Humidity Test Chamber Overview: This test chamber is used for cold, heat, humidity and dryness testing of raw materials and devices ...
2026-09-08 00:29:58
|
|
... battery forced internal short-circuit tester is an integral testing equipment to performance a comprehensive test for temperature, voltage, ...
2026-06-11 18:44:56
|
|
...device is suitable for test the drop resistance of plugs and socket-outlets, surface type mounting boxes, screw glands, gland covers, switch and ...
2026-06-11 18:53:22
|
|
...: All accessible surfaces of protected cooling system components, including accessible surfaces in intimate contact with protected cooling systems. ...
2026-06-11 18:41:02
|