161 - 170 of 215
sand ingress protection test equipment
Selling leads
|
... clause 10.1, 16.2, IEC 60669-1: 2017 Clause 10.1 &13.3.3 &20.1 &21.1, etc. This probe is intended to verify the basic protection against access to ...
2024-12-09 20:37:44
|
|
IEC 60335-2-14 Similar Test Probe B with φ125mm Circular Stop Face Product information: This is a precision test finger made in accordance with many ...
2024-12-09 20:21:30
|
|
Test Probe B Standards: This is a precision test finger made in accordance with IEC 61032 figure 2, required by many standards such as IEC60884, ...
2024-12-09 21:32:27
|
|
IEC 62368-1 Annex V.1.6 The Test Rod Probe with 1N Force Product information: This probe conforms to the standard requirement of IEC61032 test probe D...
2024-12-09 20:37:44
|
|
IEC61032 Test Probe D with 1N Force For IP4X And Shock Hazard Verification Product information: This probe conforms to the standard requirement of ...
2026-02-13 00:31:13
|
|
...Test Wall Bricks Rough Wall for Socket-outlets Waterproof Test Product information: This test wall conforms to the standard of IEC 60884-1 2013 ...
2024-12-09 19:28:52
|
|
...-Circuit-breakers for overcurrent protection for household and similar installations-Part 1: Circuit-breakers for a.c.operation clause 9.11 ...
2025-06-27 02:31:42
|
|
...Test Device Flammability Test Product overview: The equipment is used for testing the protective performance of the samples at the bottom of the ...
2026-05-01 00:17:31
|
|
IEC 62133 Cells 11.6 kPa High Altitude Simulation Low Pressure Vacuum Test Chamber Overview: It is for battery low pressure (high attitude) simulation ...
2024-12-09 19:10:13
|
|
IEC 61855 Hair Dryer Air Blockage Test Machine For Airflow Blockage And Motor Stall Testing Product Overview: The Air Blockage Test Machine is ...
2026-02-11 00:36:11
|