21 - 30 of 109
protection verify test probe c
Selling leads
|
...Test Probe 1 Figure 5 Ф50mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC 61032 test ...
2024-12-09 21:10:07
|
|
...Test Probe 2 Figure 6 Ф12.5mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC 61032 ...
2024-12-09 21:10:07
|
|
...Probe Experiment Device Used With The Testing Probe Product Information: This anti-shock probe experiment device is designed and manufactured meet ...
2025-03-06 22:28:55
|
|
Test Probe 11 with Dynamometer 75N Standards: Standard:it is designed and made according to IEC 61032 Figure 7, required by many standards such as IEC ...
2024-12-09 21:32:27
|
|
...-Probe for verification” IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” Samples and Restrictions: Household appliances, ...
2024-12-09 19:22:47
|
|
... with a diameter of 50 mm, instead of the non-circular face, is intended to verify that the moving parts of appliances shall, as far as is ...
2024-12-09 21:09:49
|
|
Test Probe A with Built-in Force for IEC61032 IP1X Safety Compliance Product information: It conforms to the standard requirements of IEC61032 fig.1, ...
2025-07-01 19:18:46
|
|
... clause 5.3.2, 8.5.4.3, V.1.2 and figure V.2, IEC60884-1:2013 clause 10.1, 16.2, IEC 60669-1: 2017 Clause 10.1 &13.3.3 &20.1 &21.1, etc. This probe ...
2024-12-09 21:17:17
|
|
...Test Probe 32 Product Overview: This probe conforms to the standard requirements of IEC 61032 test probe 32 figure 15, etc. This rod is intended to ...
2024-12-09 19:46:29
|
|
... the protection against to glowing heating elements. Probe Dimension: Probe cone part length (mm) 21.5 (0,-0.05) Probe rod part diameter (mm) Ф30±0...
2024-12-09 19:46:29
|