361 - 370 of 1219
plc vehicle testing equipment
Selling leads
|
...tem-Part 1: General requirements IEC 60529 Edition 2.1 2001-02, IEC61032 test probe C and IEC60529 for IP3, IEC60065 and etc. This rod probe is ...
2026-06-11 18:48:48
|
|
...Vehicle Connector Drop Test Machine Product information: The test device complies with the requirements of IEC 62196-1Ed. 4CDV 2020 Article 26.3, ...
2026-09-09 00:25:39
|
|
... of electric vehicles - Part 1: General requirements" Section 7.11.3 GB/T11918.1-2014 Chapter 24.3. Samples and restrictions: Charging gun ...
2026-09-09 00:25:39
|
|
...IEC 62196-3-1 Cl 101.6. It is used to carry out pressure leakage test on the sealing requirements of the liquid coolants under 10L volume. The ...
2026-09-09 00:25:38
|
|
...Test Drying Rate Testing Device For Hair Dryer With PLC Control IEC 61855 Product Information For Drying Rate Testing Device For Hair Dryer: This ...
2026-06-11 18:42:31
|
|
... of IEC60309-1 clause 20 and clause 21, IEC62196-1 clause 7.11 and clause 7.12 and etc. It is used to verify whether electrical accessories such as ...
2026-09-09 00:25:40
|
|
...Vehicle Connectors Cable Anchorage Pull Force and Torque Test Apparatus Standards & Clauses: IEC62196-1: 2014 “Plug, socket-outlets, vehicle ...
2026-06-11 18:48:29
|
|
... Samples and restrictions: Supply plug, vehicle plug and function box with cable recommended by the manufacturer. Test purpose: Used to perform ...
2026-09-09 00:25:38
|
|
....2, IEC60745-1:2006, IEC60335-1 clause 25.15, IEC60598-1 clause 5.2.10.3, IEC60065 clause 16.5 and etc. The tester is used to conduct two tests of ...
2026-06-11 18:43:04
|
|
...GS95011-4-2004, DIN 50017, etc. It simulates the condensation on electronic modules in motor vehicles. It is meant to evaluate the robustness of ...
2026-06-11 18:48:38
|