591 - 600 of 603
operation testing equipment for appliances
Selling leads
|
IEC60068-2-75 Clause Annex B Spring Hammer Tester Calibration Device Product Description This device conforms to IEC60068-2-63 and IEC 60068-2-75 ...
2026-06-11 18:43:40
|
|
Digital Torque Tester For Lamp Holders With High-Precision LCD Display Torsion resistance is a critical safety requirement for the mechanical strength ...
2026-06-11 18:43:44
|
|
IEC 60335-2-6 High-Frequency Spark Generator 3mm Spark Length Product information: Standard: Conforms to IEC 60335-2-6 clause 22.111, etc. Application...
2026-06-11 18:43:56
|
|
Screwdriver with Torque Meters (0.2~2.5Nm) Product overview: The screwdriver with torque meters are required by IEC 60335-1 & IEC 60884-1, etc. High ...
2026-06-11 18:53:21
|
|
... 12.2.5 & 12.3.10, Figure 9) Application: This testing equipment evaluates the mechanical strength of both screw-type and screwless terminals under ...
2026-09-08 00:29:59
|
|
...Equipment overview: Compliant with standards: IEC60884-1: 2013 clasue 12.2.5 and 12.3.10 Figure 11 and Table 9, UL 498. etc. It is used to examine ...
2026-06-11 18:50:10
|
|
..., etc. This device is used for household and similar purpose fixed electrical appliance switch, plug and socket, coupler for on-off ability, ...
2026-06-11 18:50:28
|
|
... spring hammer is intended to test the impact resistance to shell, operating arm, handle, knob, indicator lights and shades of electrical appliance ...
2026-06-11 18:50:36
|
|
...equipment meets the requirements of IEC 60884-1: 2013 Clause 10.1, IEC 60669-1: 2017 Clause 10.1, and etc. It is used with the testing probe for ...
2026-06-11 18:50:27
|
|
... requirements of IEC 61058-1 clause 17, IEC 61058-1-1 clause 17.4, and IEC 61058-1-2 clause 17.4. Test Scope & Application For switching and ...
2026-06-11 18:52:25
|