71 - 80 of 1039
led lampholder testing equipment
Selling leads
... Appliance Internal Wire Flexing Testing Equipment Equipment Introduction: This flexibility test equipment matches the requirements of clause 23 of ...
2024-12-09 20:12:54
|
...Testing Equipment Product overview: The rain vertical dripping testing equipment is used to verify the protective performance of the enclosure for ...
2025-07-25 00:11:26
|
...Test Equipment Product Overview: This abrasion resistance test equipment for flow-through hoses is in accordance with IEC 60335-2-2, Article 21.102...
2024-12-09 22:57:10
|
...IEC60335-2-9 clause 19.101. It is used for testing toaster’s endurance under abnormal operation. 1.2 Test Principle Toasters are operated at rated ...
2025-07-25 00:11:25
|
... Testing Equipment Product information: This testing device is required by IEC 62196-1Ed.4CDV 2020 clause 26.3, fig 19. It is used to test the ...
2024-12-09 19:39:07
|
IEC 62196-1 Mechanical Tests on Terminals Vehicle Connector Rotation Test Equipment Product information: This mechanical tests on terminals testing ...
2024-12-09 19:39:07
|
...standard requirement of IEC 60227-1 clause 5.6.3.2, 5.6.3.3; IEC 60227-2 clause 3.2, 3.3; and etc. It is used to test the bending resistance of ...
2024-12-09 20:38:03
|
... according to the standard requirement of IEC60335-2-15 clause 19.101, 19.102 and 22.103, and etc. It is used to test the comprehensive life test, ...
2024-12-09 20:38:18
|
...Test Equipment Product information: The power cord flexibility test equipment is designed and manufactured according to standard requirements of ...
2025-07-25 00:11:25
|
....2 Clause 3.1 Figure 1, IEC60245-1 clause 5.6.3.1 and etc. It complies with the relevant standard requirements of rubber plastic wires’ and cables’ ...
2025-07-25 00:11:25
|