191 - 200 of 365
iec 60335 2 testing probe
Selling leads
|
...tem-Part 1: General requirements IEC 60529 Edition 2.1 2001-02, IEC61032 test probe C and IEC60529 for IP3, IEC60065 and etc. This rod probe is ...
2026-06-11 18:48:48
|
|
...nd 12.4, IEC 62368-1:2018 clause 5.3.2, 8.5.4.3, V.1.2 and figure V.2, IEC60884-1:2013 clause 10.1, 16.2, IEC 60669-1: 2017 Clause 10.1 &13.3.3 &20...
2026-06-11 18:48:49
|
|
IEC60335-2-14 Hand-held blenders φ40 mm Cylinder Rod Test Probe Standard and Application: The φ40mm cylinder rod meets the standard requirements of ...
2026-06-11 18:50:14
|
|
IEC 60335-1 12.5kV 1.2/50μs or IEC60950-1 7kV 10/700μs Impulse Voltages Generator Standards & Clauses: IEC60335-1:2016 “Household and similar ...
2026-06-11 18:40:51
|
|
IEC 60335-2-23 Wire Frame and 200mm Wooden Sphere for Helmet-type Hairdryer Normal Operation Testing Product overview: This wire frame and wooden ...
2026-06-11 18:41:06
|
|
IEC 62368-1 R6mm Stainless Steel Blunt Test Probe Of Figure V.3 Product information: The blunt probe of figure V.3 conforms to IEC 62368-1:2018 clause ...
2026-06-11 18:53:05
|
|
Screwdriver with Torque Meters (0.2~2.5Nm) Product overview: The screwdriver with torque meters are required by IEC 60335-1 & IEC 60884-1, etc. High ...
2026-06-11 18:53:21
|
|
Test Probe 18 Ф8.6mm Small Finger Probe For Simulate Children Finger IEC 61032 Figure 12 Product Overview: This probe conforms to the standard ...
2026-06-11 18:51:17
|
|
...2018 clause V.1.3 and figure V.1 (but straight unjointed version), and etc. It is used in the enclosure protection test of the electrical equipment ...
2026-06-11 18:52:51
|
|
IEC 60529 Ed.2.1 Test Probe C for Verifying Protection of Water Product information: This probe conforms to standard requirements of IEC 60529 Edition ...
2026-06-11 18:47:54
|