1 - 10 of 110
iec61032 protection verify test probe
Selling leads
|
... by many standards such as IEC60529 for IP3 testing, IEC 60335-1, IEC60065 and etc. This test probe C is intended to verify the protection of ...
2024-12-09 21:09:49
|
|
... by many standards such as IEC60529 for IP4 testing, IEC 60335-1, IEC60065 and etc. This test probe D is intended to verify the protection of ...
2024-12-09 21:09:49
|
|
...Testing Probe D for Verifying Protection of Foreign Objects Product information: This probe conforms to the standard requirement of IEC 60529 ...
2024-12-09 20:50:30
|
|
...Test Probe C for Verifying Protection of Water Product information: This probe conforms to standard requirements of IEC 60529 Edition 2.1 2001-02, ...
2024-12-09 20:50:30
|
|
... and other standards. The stick probe is used to verify the protection of personnel from contact with hazardous parts. It is also used to verify ...
2025-03-06 22:31:59
|
|
...Test Rod Probe D Test Probe With Alligator Clip Product overview: This rod probe is intended to verify the protection of persons against access to ...
2024-12-09 21:22:19
|
|
...Test Probe 11 IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings Product Overview: This probe conforms to the standard ...
2024-12-09 19:46:29
|
|
Test Probe A with Built-in Force for IEC61032 IP1X Safety Compliance Product information: It conforms to the standard requirements of IEC61032 fig.1, ...
2025-07-01 19:18:46
|
|
...Test Probe A With Nylon Handle Product Overview: This test probe A conforms to the standard requirements of IEC61032 fig.1, IEC60529 IP1 and ...
2024-12-09 19:45:42
|
|
... with a diameter of 50 mm, instead of the non-circular face, is intended to verify that the moving parts of appliances shall, as far as is ...
2024-12-09 21:09:49
|