141 - 150 of 378
horizontal burning test apparatus
Selling leads
|
IEC 60309-1 Plugs And Vehicle Connectors Cable Anchorage Pull Force And Torque Test Apparatus Product information: This pull force and torque test ...
2026-05-01 00:17:31
|
|
...-1, mainly used for the lamps adjustment devices’ torsion, and bending test of the table lamps, floor lamps and the lamps which are for professiona...
2026-05-01 00:17:30
|
|
BS EN 12983-1 Pencil Hardness Test Apparatus For Exterior Organic Coatings Test Scratch Resistance Product overview: The equipment is complied with BS ...
2026-05-01 00:17:29
|
|
IEC 60335-1 Needle Flame Test Apparatus For Test Flammability And Fire Resistance Of Materials Product overview: The Needle Flame Tester consists of a ...
2026-05-01 00:17:31
|
|
Insulation Surface Scratch Resistance Test Apparatus For Test Household Appliances IEC 60335-1 Product information The device is used to check ...
2026-05-01 00:17:29
|
|
Needle Flame Test Apparatus For Testing Insulating Material As Per IEC 60695-11-5 Product information: The Needle Flame Tester consists of a Ф0.9mm ...
2026-05-01 00:17:31
|
|
IEC 60335-2-17 Clause 15.103 Spillage Test Apparatus For Electric Heating Pads Test Applicable Standards: GB4706.19-2008, Clause 15.2 and Figure 101 ...
2025-11-17 16:55:21
|
|
Pull Force And Torque Test Apparatus For Vehicle Plugs And Connectors Product information: This pull force and torque test equipment is used to test ...
2026-05-01 00:17:31
|
|
...according to ES 573:2021. Testing Procedure The utensil shall be filled with water at 23°C + 2°C up to 90% of its nominated capacity, and the lid ...
2026-05-01 00:17:29
|
|
...Test Apparatus Product Overview: This test apparatus conforms to IEC60065:2014 clause 8.21, figure 14~16, IEC60558-1 Fig6, IEC 60950 and etc. It is ...
2024-12-09 19:38:34
|